Page 1 of 1
Changing text in Config.TEXT_WELCOME
PostPosted:Mon Dec 03, 2018 9:54 am
by resnicke
I believe that the text on the logon screen comes from Config.TEXT_WELCOME (see below what appears for me). How do I change it?
OpenKM version 6.3.2 on Ubuntu 16.0.4
Text on logon screen:
Welcome to OpenKM !
Use a valid username and password to access to OpenKM user Desktop.
Re: Changing text in Config.TEXT_WELCOME
PostPosted:Thu Dec 06, 2018 11:18 am
by jllort
You have a configuration parameter in the administration > configuration parameters named text.welcome
https://docs.openkm.com/kcenter/view/ok ... eters.html
Re: Changing text in Config.TEXT_WELCOME
PostPosted:Mon Dec 10, 2018 7:28 am
by resnicke
Unfortunately none of the following parameters appear in the Administration Configuration screen (see attached screen shot):
text.banner
text.title
text.welcome
Perhaps I need to configure something to access these parameters?
Re: Changing text in Config.TEXT_WELCOME
PostPosted:Wed Dec 12, 2018 6:47 pm
by jllort
watch my screenshots:
support_557.png (130.46 KiB) Viewed 4151 times
support_556.png (20.54 KiB) Viewed 4151 times
Re: Changing text in Config.TEXT_WELCOME
PostPosted:Sun Dec 16, 2018 6:18 am
by resnicke
Thanks for the screenshots.
Unfortunately the Property "text.welcome" does not appear in my Configuration page as I noted. Do you know why that is and how I can get these properties to appear on the configuration page? See the attached for the pertinent S-T section on my Configuration.
Re: Changing text in Config.TEXT_WELCOME
PostPosted:Sun Dec 16, 2018 9:08 am
by jllort
I think this is caused because you are using old 6.3.2, you should upgrade to 6.3.6, please take a look at the migration guide
https://docs.openkm.com/kcenter/view/ok ... o-633.html ( you must upgrade step by step until the 6.3.6 )